月香直播免费版app下载 - 月香直播app大全下载最新版本免费安装软件

歡迎訪問昆山瑞塞奇精密儀器有限公司官方網站!

中文| English| 設為首頁| 加入收藏| 網站地圖

ban
產品分類 / Product Categories

昆山瑞塞奇精密儀器有限公司
電話: 15950925981 (楊先生)
網址:longchengbio.com
公司郵箱:[email protected] [email protected]
公司地址:江蘇省昆山經濟開發區百富路88號百富科創中心C305

紫外臭氧清洗機(Filgen)

當前位置:首頁 --> 紫外臭氧清洗機(Filgen)
UV Ozone Cleaner
UV Ozone Cleaner
產品概述:
Removal of organic contamination by the dual effect of ozone and ultraviolet light at two wavelengthsUV Ozone Cleaner※The damage-free dry cleaning method can r…
在線咨詢立即訂購
詳細介紹
Removal of organic contamination by the dual effect of ozone and ultraviolet light at two wavelengths
UV Ozone Cleaner
 
※The damage-free dry cleaning method can remove the organic contaminations that stick to the substrates by a photochemical oxidation resolution process.

Product Details


UV Ozone Cleaner Benefits
UV Ozone Cleaner

【Benefits of UV ozone cleaning method】
Easy removal of organic contaminations on the substrate that could not be removed by ultrasonic cleaning alone.
Removal of the organic solvent used in wet cleaning.
Possibility of removing organic contaminations without damaging the substrate surface.
Easier accumulation of the L-B film. (cumulative rate is greatly improved.)
Acailable at a tmospheric pressure. Not require vacuum device.


【Benefits of Filgen's UV ozone cleaner】
 Compact desktop type that saves space.
Automatic gas switching.
By connecting oxygen pipe and nitrogen pipe and setting the flow rate of each gas in advance, the device can perform the following steps automatically.
Oxygen introduction → UV cleaning → Nitrogen introduction (Ozone exhaust)
※Oxygen can increase the efficiency of ozone generation and nitrogen can purge the ozone.
(Straight tube lamp equipped model - UV253V8)
No ozone leak because it has an airtight construction.
The device chamber is an airtight construction that can maintain a pressure of 0.02 MPa.
When connecting to a gas cylinder, the device can perform the following steps automatically without the inflow of external air.
Oxygen introduction → UV cleaning → Nitrogen introduction (ozone exhaust).
※Ozone leak can shorten the life of parts of the device itself and can affect data of chemistry or biological experiments, which can cause serious problem.
(Other models besides of UV253V8)
No ozone leak when it is connected to an ozone decomposing device.
When connecting to a gas cylinder, the device can perform the following steps automatically without the inflow if external air.
Oxygen introduction → UV cleaning → Nitrogen introduction (ozone exhaust).
Optional ozone detection system and door lock mechanism are available to avoid human error that can lead to ozone or UV leak.
(Ozone detection system)
After using an ozone decomposing device or purging with nitrogen, measure the ozone concentration in the cleaning room. The door will be open after confirming the ozone concentration fulfilles the safety standard.
(Door lock mechanism)
The dedicated lock mechanism prevents the door from being opened while the UV lamp is on (during ozone generation).
(Interlocking ozone detection system and door lock mechanism)
By equipping and interlocking the optional ozone detection system and door lock mechanism, the door cannot be opened unless the ozone concentration in the cleaning room fulfills the safery standard.
Depending on the application, two different types of UV lamps (straight tube UV lamps and high density high power grid UV lamps) are available to be selected.
UV Ozone Cleaner UV Ozone Cleaner
For the above two types of low pressure mercury lamps, fused quartz specifications and synthetic quartz specifications are available. Please select according to the application.
It is also possible to replace the lamp later, without changing the other parts of the device.
※The synthetic quartz specification emits 184.9 nm wavelength light much better (about 1.7 times) than the fused quartz specification, which may dramatically improve the cleaning efficiency.
Digital timer with count down function.
Optional Ozone killer (ozone docomposing device) equipping can remove and exhaust the ozone and makes the working environment even safer.
Easy connection because all the nylon tubes and joint connectors are using one-touch joints.
Flexible length of the connection tube, which is made of nylon and can be cut freely.
 

 



UV Ozone Cleaner The principal of UV ozone cleaning

UV Ozone Cleaner

UV ozone cleaning is a photosensitive oxidation process using short wavelength UV light. During this process, organic contaminants such as photoresist, resin, silicon oil, and flux are decomposed by absorbing UV radiation with short wavelength.
Oxygen molecules become ozone at the wavelength of 184.9 nm and ozone is decomposed at a wavelength of 253.7 nm, simultaneously producing reactive oxygen species.
Most of the 253.7 nm UV light is absorbed by hydrocarbons and ozone.
The products of the decomposed contaminants react with the reactive oxygen species and form simpler volatile molecules (ex. CO2 H2O etc.), then detach from the substrate surface.
When both 184.9 nm and 253.7nm wavelengths UV light exist, oxygen atoms continue to be generated and turn into ozone, then the ozone decompose.

UV Ozone Cleaner

Converting the 184.9 nm UV light into energy per mole is 647 KJ/mol.
Converting the 253.7 nm UV light into energy per mole is 472 KJ/mol.
The binding energy of various molecules of organic matter is listed in the right table.
 
BindingBinding energy
(KJ/mol)
BindingBinding energy
(KJ/mol)
O-O138.9C=C607
O=O490.4C≡C828
O-H462.8C=O724
C-C347.7C-Cl328.4
C-H413.4H-F593.2
C-N291.6C-F441.0
C≡N791H-Cl431.8
C-O351.5N-H309.8


UV Ozone Cleaner Application
UV Ozone Cleaner

 ◆Pretreatment of thin film coating
ITO film cleaning of the organic EL
Substrate cleaning before LB film accumulation
Photoresist cleaning
Cleaning silicon wafer, lens, mirror, solar panel, cold rolled steel, inertial induction subcomponent, GaAs wafer
Cleaning hybrid circuit and flat panel LCD
Improving adhesion of coating to plastic
Substrate cleaning process before film formation by dipping method

◆Electron microscope related applications
 Removal of contaminants of SEM and/or TEM specimens
Improving wettability and affinity of diamond knives and glass knives
Improving wettability and hydrophilicity of support film

◆Ohers
 Sterilization and washing of the biolabware
AFM cantilever
PDMS surface modification
Cleaning of hermetic seal for ultra-high vacuum
Removal of flux
Etching of teflon, viton and other organic materials
Glass degassing
Removal of the wafer tape
Ink removal from tested wafer
Annealing of Ta2O5 dielectric films
上一個:AZtecOneXT System
QQ在線咨詢
售前技術咨詢
15950925981
售后客服熱線
15950925981